反对称铺层碳纤维复合材料圆柱壳的双稳态应力特性

双稳态复合材料可广泛应用于各类可变结构的设计。针对反对称铺层的圆柱壳,利用有限元软件ABAQUS的Standard准静态分析,模拟其双稳态跳变过程和跳回过程,探讨在整个连续过程中圆柱壳上的应力分布情况,以及应力随时间和载荷变化的趋势,从而对该类可变结构的设计起到指导作用。结果表明:该类复合材料圆柱壳跳变过程中最大应力出现在载荷施加点与约束点附近,第二稳态下应力关于板中心呈中心对称分布,最大应力沿板壳对角线出现在四个角内侧附近,而跳回过程中应力由第二稳态下的分布慢慢变为集中在约束点附近。而且整个圆柱壳上的最大应力时刻与最大载荷施加的时刻不重叠,具有滞后性。     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

Experimental investigation for machinability aspects of graphene oxide/carbon fiber reinforced polymer nanocomposites and predictive modeling using hybrid approach

This article explores the drilling behavior of polymer nanocomposites reinforced by Graphene oxide/Carbon fiber using a hybrid method of Grey theory and Principal component analysis (GR-PCA). An online digital dynamometer was employed for the evaluation of Thrust Force and Torque. The image processing technique computes the delamination. Response surface methodology (RSM) considers the parameters, namely, drilling speed (S), feed rate (F), Graphene Oxide wt.% (G) in designing the experimentation array. Principal component analysis (PCA) was used to tackle the response priority weight during the combination of multiple functions. Analysis of variance (ANOVA) scrutinized the influence of parameters and intended the regression models to predict the response. GR-PCA evaluated the optimal parametric setting and remarked that feed rate acts as the most predominant factor. The higher feed rate and wt.% of G is responsible for surface damages like fiber pull-out, fiber fracture and cracks. A significant improvement in drilling responses has been obtained and also validates through confirmatory test and microstructure investigations.     

电磁屏蔽石墨混凝土电导率实验研究

石墨混凝土具有耐酸碱、成本低、性能稳定等优点。针对电导率是材料电磁屏蔽性能的重要影响参数,以获得最佳导电性能为方向设计了石墨混凝土的探索性制备方案,研究了其配合比对混凝土电导率性能的影响,采用四针电极法考察石墨混凝土的导电性能。实验结果表明,石墨混凝土中电导率存在不均匀性,其中粗颗粒石墨混凝土比细颗粒石墨混凝土具有更好的导电性能,其值约0．8 S/cm,表现出较好的性能一致性,为工程应用提供了条件。增加20%导电镍粉,对导电性能有改善,但水灰比较大。掺碳纤维石墨混凝土样品,针对石墨质量分数71%,相对石墨掺入碳纤维2%,电导率值由0．8 S/cm降为0．17 S/cm。其中材料的多孔性是材料导电性降低的主要因素。     

Q345低合金结构钢的高温强度试验研究

采用恒温加载试验方法对钢结构建筑常用的Q345低合金结构钢的高温强度进行试验研究,采用切线交点法确定钢材有效屈服强度,并与其它方法强度取值进行对比,给出钢材高温强度回归公式,为钢结构建筑的抗火分析提供依据。     

基于PON技术的多站雷达数字光纤传输系统设计

提出一种多站雷达体系雷达数据光纤传输系统的方案设计和实现方法。与传统雷达使用的光纤传输系统不同,而是采用技术较新的基于无源光网络PON的实时数据通信系统,这是无源光网络技术在多传感器实时通信领域的首次应用。在系统设计中利用先进的光电子和在编程技术,实现了点对多点雷达数据光纤传输,提高了信号传输质量,同时系统具有动态接入和扩容的能力。     

L波段掺铒光纤放大器增益钳制及提高特性研究

报道了一种新型980 nm激光二极管(LD)泵浦高增益的掺铒光纤放大器(EDFA).通过加入中心波长为1 550 nm光纤光栅(FBG)可以明显提高增益,并分析了增益钳制的原理.实验得到其增益比无FBG结构EDFA提高8 dB,并得到了小信号输入时增益25 dB的有效钳制.     

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

High-performance ballistic fibers, such as aramid fiber and ultra-high-molecular-weight polyethylene (UHMWPE), are commonly used in anti-ballistic structures due to their low density, high tensile strength and high specific modulus. However, their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure. In contrast, carbon fiber reinforced epoxy resin matrix composites (CFRP) have the characteristics of high modulus in the thickness direction and high shear resistance. However, carbon fibers are rarely used and applied for protection purposes. A hybridization with aramid fiber reinforced epoxy resin matrix composites (AFRP) and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites. The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated. Through conducting mechanical property tests and ballistic tests, two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software, respectively. The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced. The ballistic tests’ results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7% of AFRP. When CFRP was on the striking face, the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage. The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process. These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt% and 30 wt%.     

钢管在冲击荷载作用下的变形与失效破坏

为研究钢管在弹体侵彻过程中的变形特点,基于ANSYS/LS-DYNA软件,采用Johnson-Cook模型,模拟了半球形弹体以不同速度正向冲击钢管时的非线性动力响应情况。结果表明：弹体速度越小,钢管的抗侵彻性能越好;弹体速度越接近临界破坏速度,钢管降低弹体速度的能力就越明显;弹体冲击钢管时,钢管上表面比下表面更容易产生大变形,消耗更多的弹体动能,并在抗侵彻过程中伴有局部凹陷、蝶形变形和贯穿现象。实验结果可为圆柱壳结构钢管在冲击荷载作用下的耗能分析提供参考。     

手性吸波混凝土电磁屏蔽性能实验研究

综述了手性吸波的研究现状。在实验中进行了手性吸波混凝土的制备,测试了实验样品的电磁屏蔽性能。结果表明,手性吸波模型是混凝土吸波的完整理论,对混凝土的高吸波性能、高屏蔽性能、宽频性能的研究提供了理论基础,为先进吸波混凝土的研制开辟了新途径。